Improved interior safety features
The Focus offers a suite of new safety innovations, which includes Ford’s next-generation driver-front airbag with enhanced chest protection technology. The new airbag uses a reconfigured curve-shaped tether system that pulls in the lower section to create a “pocket” to help lessen the impact of the airbag on the driver’s chest and ribs in frontal crashes.
The Focus offers a suite of new safety innovations, which includes Ford’s next-generation driver-front airbag with enhanced chest protection technology. The new airbag uses a reconfigured curve-shaped tether system that pulls in the lower section to create a “pocket” to help lessen the impact of the airbag on the driver’s chest and ribs in frontal crashes.
Ford’s innovative side airbags feature unique shoulder vents that stay open and reduce pressure for smaller occupants who typically benefit from reduced forces. Taller occupants whose shoulders block the vent could benefit from the higher pressures.
Focus also will be Ford’s first car ever to feature front passenger airbags with adaptive venting technology that diverts some of the gas from the air bag inflators through vents outside of the airbags. The restraints control module – the control center of Ford’s advanced safety systems – adjusts the level of venting based on seat position.
The new passenger airbag is designed to enhance head and neck protection by better matching deployment force with occupant size. This innovative system uses a small pyrotechnic device to force open the vent and can provide less pressure in the airbag when it’s sufficient to help protect the occupant.
Innovative “tailor-rolling” process
In addition to the new airbags, the new Focus’ vehicle structure provides enhanced crash protection with a B-pillar reinforcement, a key structural part made from ultra-high-strength steel produced using an innovative “tailor rolling” process. The process allows the thickness of the steel sheet to be varied along its length so the component has increased strength in the areas that are subjected to the greatest loads.
In addition to the new airbags, the new Focus’ vehicle structure provides enhanced crash protection with a B-pillar reinforcement, a key structural part made from ultra-high-strength steel produced using an innovative “tailor rolling” process. The process allows the thickness of the steel sheet to be varied along its length so the component has increased strength in the areas that are subjected to the greatest loads.
High-strength steels comprise 55 percent of the Focus’ body shell, and ultra-high-strength and boron steels make up more than 31 percent of its skeletal structure. These advanced materials help the structure meet crash regulations across world markets while minimizing the vehicle’s weight to help maximize fuel economy.
Ford media
No comments:
Post a Comment